Sunday, August 22, 2010

Pumpkin acquired.

It took posting on Facebook and 3 hours of driving in the pouring rain, but I finally got two cans of canned pumpkin. Special thanks to Gina and Sue for finding me 2 cans, and to Michele for trying, even tho they were expired. :)

the brewing whent well and the beer smelled great. finally have something to look forward to in October.

Friday, August 20, 2010

It takes a village to brew a beer.

My idea was simple enough; a pumpkin beer ready for the 1st of October.  What could be a better way to start October?  I need to brew today (8/21/10) in order for it to be ready in time.  What could go wrong?

Did you know there is a canned pumpkin shortage?  Well, that's what could go wrong.  Turns out due to bad weather last year you can't buy canned pumpkin in the store, and late August is too early to buy fresh pumpkin.

I checked all the stores... Then I started calling around.  So far I've found one can of fresh and one can of expired (over 2 years).  I need at least 2 cans.  If you have canned pumpkin, please e-mail me.  There's a 6 pack in it for you if you do!

Buckeye Chocolate Peanut Butter Porter: Bottling day

Today I bottled the Buckeye Chocolate Peanut Butter Porter, it turned out to be a 3.5% abv beer with very prominent chocolate and peanut butter notes.  Very dark, and very delicious. :)  Even my wife said she thought it would be good when it was ready.  Less than two weeks till the first OSU game and I crack the first one open!

Sunday, August 15, 2010

Updates on Belgian Tripel, Buckeye Chocolate Peanut Butter Porter and Maple Ale

Yesterday I bottled the Belgian Tripel.  It's a slightly fruity ale with subtle banana notes, and I think it will be really good with an orange slice.  It'll be ready to try in 2-3 weeks, plus it is 8.5% ABV so I have high hopes for this brew.

I also took a hydrometer reading on the Buckeye Chocolate Peanut Butter Porter, It needs to be bottled this Friday to be ready for the first OSU game.  It's coming along quite nicely.  It probably won't have a high alcohol volume, however I tasted the sample and it was delicious.  Very prominent chocolate and Peanut butter notes.  I am really looking forward to this brew.

The Maple Ale was transfered to the secondary.  The gravity is down to where it was when I bottled the previous maple batch and had a much more prominent maple flavor compared to the last batch.  I think I may need to use less hops in the recipe however, it seemed a little too bitter.  Not much though, I'll have to see how it turns out in the bottle.

More to come...

Absinthe Update 3; The Infused Bottle is Ready

Friday marked the day that my infused bottle of absinthe is ready. I sanitized the everclear bottles and put the absinthe back in.

It's a very dark green. I started by putting 3 sugar cubes in a strainer, filled the glass I got with my kit from midwestsupplies.com with ice, poured one shot in the glass, then I slowly poured cold water over the sugar to dissolve it.

The smell of the liquor in the shot glass was like rubbing alcohol and liquorish. The smell in the glass was a very smooth and pleasant smell with a slight liquorish aroma.  The color was a very nice Green.  The taste?

Bile.


I added another 6 sugar cubes, and the taste was much better (relatively). It is drinkable. The interesting thing is there is no alcohol burn.

So, how did I feel after drinking it? Now to be fair i don't drink liquor. I'm an exclusive beer drinker. I stopped drinking liquor around 5 years ago. With that being said, I have drank the glass and I wouldn't say I was drunk, but I certainly wouldn't drive.  My body feels drunk but my head feels clearer than normal at this point.

 No hallucinations. lol... Well, at least according to dragon huddled in the corner I was not hallucinating cause that's all he kept saying...

Monday, August 9, 2010

Making Absinthe Update 2

Tonight I removed the wormwood, and added the other ingredients. The recipe is in my last update.
I mixed all the ingredients together in a bowl and then put them in a grain bag.

The smell of the ingredients was kind of a combination of gum and black liquorish. 
I removed the wormwood.  The liquor is now a very dark green.   The liquor smelled like a combination of fire and death. :)

At the advice of /r/Homebrewing since I am making two bottles, I am going to try one as an infusion and the other bottle I am going to try to distill with a cheap DIY stovetop still.





I put it back in the closet in my brewery on the top shelf.  It's hard to see, but it's in there.

This coming Saturday the infusion absinthe will be ready and I plan on trying some. :)

Incidentally in this picture at the bottom you can see my plastic primary with the maple ale in it, and the glass carboy with belgian tripel in it.  Just to the right of the primary is my other glass carboy with my Buckeye Chocolate Peanut Butter Porter. :)  Also there are several bottles waiting to make it to the fridge.

More updates to come...

Saturday, August 7, 2010

Maple Beer Recipe change

After the great advice I got from /r/Homebrewing I decided to add the second half of the maple syrup to the last 15 minutes of the boil to avoid infections.  I was hoping to get profound maple taste, however boiling it in the last 15 minutes should give me what I want without the risk of infections.

Friday, August 6, 2010

Making Absinthe

Absinthe became "legal" in the United States a few years ago.  I put the word "legal" in quotes because the law limits the amount of thujone (the chemical from wormwood) in absinthe.  HOWEVER, wormwood is legal to buy in the US, and there is nothing stopping you from making your own absinthe.

Making spirits is significantly different than making beer, however I have found that any alcohol over 151 proof can be used to make absinthe.  Everclear seems to be best because there is no flavoring, so... I got two bottles of everclear and two ounces of wormwood. :)

I started soaking the wormwood in the everclear Wed. and the liquor has already changed from clear to dark green.  Yes, those are boobs on a plaque in the back ground.  It was a birthday gift, and it looks good in my brewery, which is somewhat of a 'man cave'.

I am going to soak the wormwood for 5 days then remove the absinthe and add:


Two tablespoon fennel seeds
Two tablespoon Dalmatian sage
Two teaspoon spearmint

One teaspoon coriander seeds

One half teaspoon caraway seeds

One Quarter Teaspoon cardomon pods

I'll soak that for 4 more days and then remove and the absinthe is ready to drink.  More updates to come...

Thursday, August 5, 2010

Maple Beer (Round 2)

My absolute best beer I've made so far was my 6th brew, a maple beer.  It was so popular it went quick and I had to horde the last few bottles. (Of which I only have 3 left!)  It turned out to be a very smooth drinking amber beer with a maple after taste and very little hop notes.  After several weeks in the bottle it is as clear as a commercial beer.

This weekend I am going to brew round two of this recipe.  I am making two changes to the recipe (which I originally got from the BYO May/June issue)  I am adding more maple syrup, (25 oz instead of 17 oz) but only half of it to the boil, the other half I am going to add to the secondary to try to get a more prevalent maple taste.  Also I am adding slightly more Liquid Malt Extract for simplicity (6.6 lbs instead of 5.8 lbs).

Here is my recipe:

Malt:
6.6 Lbs Golden light LME

Grains:
1 Lb Toasted Pale Malt 2.2L 6 Row
8 oz Crystal Malt 20L

Hops:
1 oz Cluster (60 Min)
1 oz Willamette (15 min)

Yeast:
Safale US-05 American Style Dry Yeast

Adjunct:
1 Tbls Irish Moss (15 min)
12.5 oz Pure Maple Syrup (60 min)
12.5 oz Pure Maple Syrup (Secondary) (15 min)

**For priming: 1/2 Cup Priming Sugar 1/4 cup maple syrup**

EDIT:  I decided to put the second half of the maple in the wort in the last 15 minutes at the advice of reddit.com/r/homebrewing

Buckeye Chocolate Peanut Butter Porter Update 1

I transfered to the secondary last night.  I was a little nervous because the air lock wasn't bubbling like normal, however the gravity had dropped from 1.044 to 1.020 so it is fermenting.

An initial taste test revealed a great chocolate taste, but not enough peanut butter.  I wanted to add 4 oz of powdered peanut butter, but I only had 1.9 oz, so I added that and it tasted great. :)  Can't wait for September 2nd!